C2 Photo Album

album:March 2019

Photos from March 2019

After turning the roller bearing cover, an end mill was used to form the bolt head recesses. - Chris Veitch, March 2019
C2-800-1259v3.jpg
C2-800-1260v3.jpg
Turning a coupling rod roller bearing cover on the lathe - Andrew Nelms - March 2019
Dave uses the hydraulic press to straighten the bend connecting rod. - Erle Ford, March 2019
C2-800-1261v3.jpg
C2-800-1262v3.jpg
In another view, dave uses the hydraulic press to straighten the bend connecting rod. - Erle Ford, March 2019
Measuring the now straight rod end bearing against a parallel. - Erle Ford, March 2019
C2-800-1263v3.jpg
C2-800-1264v3.jpg
Work continues on the oil lubricator drive - Erle Ford, March 2019
Finished roller bearing cover. Only another 23 of these (of various sizes) to make - Andrew Nelms, March 2019
C2-800-1265v3.jpg
C2-800-1266v3.jpg
It's amazing how a laser cut profile covered in mill scale and rust can be turned into this! - Andrew Nelms, March 2019