album:October_2021

Blank ready for maching the final (and largest) bearing spacers at the next working party. - Chris Veitch 24/10/2021

Olympic rings? Well, not quite but some of the new valve gear bearing spacers machined by Chris this weekend. - Chris Veitch 24/10/2021

Here are the middle and front cab support brackets laid out in what will become their final shape. Hopefully, these cab be welded together at the next working party in November. - Andrew Nelms 25/10/2021

The frames of the two middle cab support brackets cut to size. - Andrew Nelms 24/10/2021

Chris machining the bearing spacers on one of the DSG lathes in the machine shop. - Andrew Nelms 24/10/2021

The Gigabash team were around over the weekend replacing the old loco shed doors with some new "temporary" doors. - Andrew Nelms 24/10/2021

The 60x60x6mm steel angle cut up ready for turning into the cab support brackets. - Andrew Nelms 23/10/2021

Chris helping with cutting up the steel for the cab support brackets. - Andrew Nelms 24/10/2021