C2 Photo Album

album:October 2026

Reverser latch plate returned from nitride hardening along with the latch itself which has been completed by Erle at home. -Andrew Nelms, Oct 2026
C2-800-2515v3.jpg
C2-800-2516v3.jpg
Trial fit of the return cranks. - Andrew Nelms, Oct 2026
checking the alignment of the expansion links and return cranks. - Andrew Nelms, Oct 2026
C2-800-2517v3.jpg
C2-800-2518v3.jpg
First trial fit of the expansion link carriers in the motion bracket. - Andrew Nelms, Oct 2026
Trial fit of the return cranks. - Andrew Nelms, Oct 2026
C2-800-2519v3.jpg
C2-800-2520v3.jpg
On the Tuesday of the working party, Andrew found him self taking the day off to drive the Woodland Wanderer service on the locomotive Lyd. It was a typical autumn grey day. (locomotive stationary). Andrew Nelms Oct 2026.
Return (eccentric) rod bearings fitted. - Erle Ford, Oct 2026
C2-800-2521v3.jpg
C2-800-2522v3.jpg
Completed big end bearing covers. - Erle Ford, Oct 2026
Tapping the fixing holes in the big end bearing covers. - Erle Ford, Oct 2026
C2-800-2523v3.jpg
C2-800-2524v3.jpg
Big end bearing mounted and return crank trial fitted. - Erle Ford, Oct 2026
Big end bearings and covers fully assembled. - Erle Ford, Oct 2026
C2-800-2525v3.jpg
C2-800-2526v3.jpg
Pressing in the return (eccentric) rod bearings on the hydraulic press. Erle Ford, Oct 2026
C2-800-2527v3.jpg
C2-800-2528v3.jpg
Pressing in the return (eccentric) rod bearings on the hydraulic press. Erle Ford, Oct 2026