C2 Photo Album
Photo Album Home 
 
 
 

album:November 2019

C2-800-1484v3.jpg
C2-800-1485v3.jpg
Dave steam cleaning the spare lubricator. Nov 2019
Replacement operating handle turned by Erle. Nice job! - Nov 2019
C2-800-1486v3.jpg
C2-800-1487v3.jpg
Measuring the bores of the cylinders - Alan James - Nov 2019
Finishing the painting of the cylinder blocks - ready to be fitted at the next working party - Alan James - Nov 2019
C2-800-1488v3.jpg
C2-800-1489v3.jpg
Finishing the painting of the cylinder blocks - ready to be fitted at the next working party - Alan James - Nov 2019
Measuring the bores of the cylinders - Alan James - Nov 2019
C2-800-1490v3.jpg
C2-800-1491v3.jpg
Reaming of the bolt holes in the frames. These are usually behind the springs which have been removed for for this task. - Andrew Nelms - Nov 2019
First Motion bracket Fitted - Andrew Nelms - Nov 2019
C2-800-1492v3.jpg
C2-800-1493v3.jpg
Motion brackets fitted for the final time. Andrew Nelms - Nov 2019
Knuckle joints cheekily posed on James Spooner’s new manifold casting (Just because it was there!) - Chris Veitch Nov 2019
C2-800-1494v3.jpg
C2-800-1495v3.jpg
Knuckle joint covers at various stages of manufacture. From plasma-cut (left) through to machined (right) - Chris Veitch - Nov 2019
Dave cracking a nut with a sledge hammer taken to new levels at this working party - Andrew Nelms Nov 2019
C2-800-1496v3.jpg
C2-800-1497v3.jpg
Fitted bolts for motion brackets and cylinders as new from Crabb Engineering - Andrew Nelms - Dec 2019