C2 PROJECT
C2 Photo Album
album:March 2019
Photos from March 2019
After turning the roller bearing cover, an end mill was used to form the bolt head recesses. - Chris Veitch, March 2019
Turning a coupling rod roller bearing cover on the lathe - Andrew Nelms - March 2019
Dave uses the hydraulic press to straighten the bend connecting rod. - Erle Ford, March 2019
In another view, dave uses the hydraulic press to straighten the bend connecting rod. - Erle Ford, March 2019
Measuring the now straight rod end bearing against a parallel. - Erle Ford, March 2019
Work continues on the oil lubricator drive - Erle Ford, March 2019
Finished roller bearing cover. Only another 23 of these (of various sizes) to make - Andrew Nelms, March 2019
It's amazing how a laser cut profile covered in mill scale and rust can be turned into this! - Andrew Nelms, March 2019
Prototype labelling on the lubricators. Text to be agreed for the final version - Erle Ford, March 2019
Cleaning up the lubricator lids - Erle Ford, March 2019
Straps, acting as handles for the lubricator coarse filter and also as springs to keep it in place when the lids are fitted - Erle Ford, March 2019
All three mild steel tender brake stretchers with their stainless steel pins welded in. - Andrew Nelms, March 2019
Setting up the tender brake stretchers ready for welding in the stainless steel pins. - Andrew Nelms, March 2019
